您好,欢迎光临济南华维数控设备有限公司!

全国咨询服务热线 欢迎来电洽谈

高级搜索:

联系我们

联系我们

联系人:季经理

全国统一热线:400-6587-688

传真:0531-88628288

公司Q Q: 1365811935

手机:15853195586

地址:山东省济南市同华路18-1号

官网:www.jnhwcnc.com

http://jnhwcnc.en.alibaba.com

服务与支持

CNC engraving machine for work environment requirements

来源: 时间:2019-10-24 14:15:00 浏览次数:

As we all know, precision CNC engraving machines generally required constant temperature environment, and only at a constant temperature, in order to ensure accuracy and processing of the engraving machine. Ordinary CNC engraving machine room is no specific requirement, but a lot of practice shows that when the temperature is too high when the NC system failure rate is greatly increased. Humid environment will reduce the reliability of CNC engraving machine, especially in the larger wet sour gas environments, printed circuit boards and connectors will rust, electric machine failure will increase, as follows:
1, ambient temperature should be between 0 ~ 35 ℃, avoid direct sunlight for CNC engraving machine, room should be equipped with good lighting equipment.
2, in order to increase the accuracy of carving engraving machine, reducing the thermal deformation of the machine, if the conditions can be CNC engraving machine is installed in a relatively closed, the installation of air-conditioning equipment plant.
3, the working environment relative humidity should be less than 75%. CNC engraving machine should be installed in a place away from splashes and prevent plant dripping.
  4, away from excessive dust and corrosive gas environments.

关键字: