The fixing method of the vibration engraving machine can be selected according to the needs and environment. The following provide two common fixing methods:

1. The foundation bracket installation method is suitable for heavier equipment and requires the use of screws to stabilize the columns, beams, and other parts on the wall or workbench floor as support points. According to the product structure of different manufacturers, there may be differences; Attention should be paid to adjusting the level and tightness during operation to achieve the desired effect and ensure the normal operation of the machine. To avoid safety accidents, non personnel are not allowed to disassemble and repair at will. If any abnormal situation is found, the manufacturer should be contacted in a timely manner for handling. If you want to handle the changes on your own, you can follow the corresponding instructions to complete the changes step by step under experienced guidance. This is more conducive to ensuring the normal operation and maintenance time of the equipment. If any problems occur in the later stage, they should be stopped and checked in a timely manner to avoid unnecessary losses and troubles. 2. Desktop style is simpler, simply place the supporting work platform on a flat and hard ground (it is recommended not to place it directly in a basement or unstable ground). The advantage of this method is that it is convenient and fast, making it a good alternative for small processing situations. By adjusting the spring pressure at the four corners and center, the stable operation of the cutting head is ensured. It is worth noting that when purchasing, it is necessary to clarify whether the size specifications are in line with one's actual application scenario when selecting. Therefore, the appropriate method should be selected according to the specific situation, and daily maintenance should also be done to ensure safe production**

In summary, the vibration engraving and milling machine can effectively improve work efficiency, and appropriate deployment should be made according to the site conditions. Attention should also be paid to subsequent maintenance matters to ensure the safety of the equipment and itself** Therefore, it is necessary to strictly follow the requirements during use**