Hello, welcome to Jinan Huawei CNC machinery CO., Ltd

National Advisory Service Hotline

Advanced Search:


Contact us


contact us

Contacts:JI Manager

Unified hotline:400-6587-688

Tel: (86)531-88276988

Fax:(86)531-88276988

Phone number:0086-15269186223

Address: No.18 Tonghua Road ,

Licheng district , Jinan city, 
shandong province, China



technical support

CNC machine tools in the Points for Attention

Source: Time:2016-03-10 08:38:53 views:

CNC machine tools in use should pay attention:
Before using CNC machine tools, machine tools should carefully read the instruction manual and other relevant information, the use of the machine for proper operation, and note the following:
(1) machine operator, maintenance personnel must master the professional or technical training of staff expertise appropriate machine, and the machine must be operated according to safety rules and regulations for safe operation;
(2) Non-professionals do not open the cabinet door, opened the machine must be sure that you have turned off the power switch before the cabinet door. Only qualified service personnel are allowed to open the cabinet door, energized overhaul;
(3) In addition to some of the parameters available to the user and can be altered, other system parameters, spindle parameters, servo parameters, unauthorized users can not modify, otherwise the operator will bring equipment, artifacts, and other personal injury; pump inlet
(4) After modifying parameters, for the first time machining, without loading the tool and the workpiece trial run with machine lock, single block, etc., verifying that the machine properly before use the machine;
(5) machine tools, machine manufacturer PLC program is required by machine design without modification. Incorrect modifications may cause damage to the machine operating the machine, or cause injury to the operator;
(6) Recommendation machine up to 24 hours of continuous operation, if continuous running time is too long will affect the life of the electrical system and other mechanical devices, which can affect the accuracy of machine tools;
(7) All machine connectors, fittings, etc., are not allowed to pull live, interpolation operation, otherwise it will cause serious consequences.
keys: