Hello, welcome to Jinan Huawei CNC machinery CO., Ltd

National Advisory Service Hotline

Advanced Search:


Contact us


contact us

Contacts:JI Manager

Unified hotline:400-6587-688

Tel: (86)531-88276988

Fax:(86)531-88276988

Phone number:0086-15269186223

Address: No.18 Tonghua Road ,

Licheng district , Jinan city, 
shandong province, China



Common problem

Engraving machine common fault what?

Source: Time:2016-03-09 13:49:31 views:

Engraving Machine Troubleshooting 1, the spindle motor short circuit, bad bearings, broken rotor, such as silk slip 2, limit switches and limit switches line perishable 3, Z-axis 608 is easy to bad bearings and couplings opened often leads to the Z-axis tool bar or shades 4, the pump is easy to sound or no water
Engraving Machine Troubleshooting
1, the spindle motor short circuit, bad bearings, broken rotor, such as silk slip
2, limit switches and limit switches line perishable
3, Z-axis 608 is easy to bad bearings and couplings opened often leads to the Z-axis tool bar or shades
4, the pump is easy to sound or no water
5, prone to slip marks six months after compasses
6, Z axis screw length of time will be a big noise walking, walking up and down when the regular card
7, Z-axis and Y-axis dust-poor soils too
8, X-axis and Y-axis of the lead screw nut is easy to fall, the machine is easy to loose the top wire
9, easy to drive short-circuit, the stepper motor does not turn easily, off-axis, the vertical clearance should be noted that the use of engraving machine safe use of electricity
10, computer engraving machine can not send a signal

keys: