To avoid any issues, we can try the following steps:

1. Check if the pliers or clamps used for carving on the carving machine are used incorrectly? At the same time, the wear of the carving machine pliers or clamps can also cause the displacement of the carved object. If the pliers or clamps are too tight, it can also cause the carved object to pop out at the moment when the blade comes into contact with it.

2. For irregularly shaped objects to be carved, the carving machine appears to be tightly fixed on the surface and will shake back and forth when subjected to downward pressure. At this point, you can try placing some waste underneath the object to increase friction. In addition, it is important to keep the packaging that comes with the item. Although JT2-0ZU has an irregular shape, the packaging it carries may be very regular and easy to secure. With a small strap, irregularly shaped objects can be easily secured. Or try using tools to fix its regular parts and discard its irregular parts.

If the downward pressure on the carved object is significant, consider whether you must use a conical nose. If the diamond blade of the woodworking carving machine moves under excessive pressure during the carving process, the pressure on the side of the tool will cause the carved object to move. If an incorrect diamond knife is used, it can also cause the same problem. A 90 or 100 degree diamond knife will deeply carve into the material, causing it to move during the carving process.